5¢ Blue
Printing Method: Rotary Press
Subject: George Washington
Number issued: 7,820,500
Perforations: 10 vertically
Watermark: Single Line USPS wmk
Scott #: 458
Issued: March 9, 1916
As Pairs
Used
$15 - $90
No postmark with gum (MH)
$20 - $25
Full perfect gum, no postmark
no trace of stamp hinge mark (MNH)
$60 - $125
Add 125% if the pair has a line between the stamps (Line Pair)
As Singles
Used
$3 - $12
No postmark with gum (MH)
$10 - $20
Full perfect gum, no postmark
no trace of stamp hinge mark (MNH)
$15 - $35
Collectors often find these items and are puzzled as to what they are. These were created in 1910 for use in experimenting with the new rotary press which was to be used for coil stamps. There was some thought for using these as full sheet trials but this was discarded as it was a bit too much to take on at the time. The imperforates were created in 3 x 2 or 1 x 3 configurations. The perforated 12 were created in strips of vertical three (some with a straight edge at the top) and the perforated 10 were created in two pairs perforated horizontally.
A Stickney Rotary Press Machine
The rotary plates were used in 1910 on an experimental basis, no stamps were issued from this test. 1914 saw the first use of the Rotary plates for production. The rotary plates were flat plates that were curved in order to fit the rotary machine. The plates were 10 stamps wide by 15 stamps high. Two pairs of these plates resulted in 340 coil stamps with each printing. Curving the plate increased the height of the stamp from 22 1/4 mm that flat plates produce to a slightly higher 23mm. Where the two plates join a thin line of color lies between the stamps, this is known as a line pair and command a price premium.
The watermark consists of single lined USPS letters. A stamp may show only part of a letter or letters